SKMEI 1418 / 1427 digital altimeter

SKMEI 1418 / 1427 barometer mode displays the current altitude and current temperature measurement. It also stores a history of altitudes for 24 hours with one measurement per hour. Keep reading to find out how to set it up, calibrate and use it.

Buttons and main screen layout

Setting mode

1.    From the main screen, press the dedicated Altimeter button to enter altimeter mode.

2.    Press and hold the MODE button to enter altimeter setting mode.

In the setting mode, you can cycle through three types of settings for barometer mode using the MODE button.

ZERO CAL --> ALTI CAL --> SEAP CAL --> F.DEF CAL

ZERO CAL = Set the altitude to zero at the current air pressure

ALTI CAL = Altitude calibration

SEAP CAL = Sea air pressure calibration

F.DEF CAL = Reset to default factory settings

Setting the altitude to zero

1.    Cycle to ZERO CAL screen and press either the UP or DOWN button to select yes or no.

2.    Press and hold the MODE button to apply your selection.

Altitude calibration

1.    Cycle to ALTI CAL screen and press either the UP or DOWN button to increase or decrease your customized altitude.

2.    Press and hold the MODE button to apply your change.

Reset to default factory settings

1.    Cycle to F.DEF CAL screen and press either the UP or DOWN button to select yes or no.

2.    Press and hold the MODE button to apply your selection.

Changing the top display

While in barometer mode screen, press the BAROmeter button to cycle the top display to show different information.

Temperature --> Altitudes history graph

The altitudes history graph is showing altitudes measured every hour automatically in the background.

Viewing altitude history

1.    While in barometer mode screen, press the BAROmeter button to cycle the top display to show the altitude history graph.

2.    Press the DOWN button to immediately showing the altitude measurement of the last hour.

3.    Keep pressing the DOWN button to cycle back in time hour by hour to show the altitude measurement of each hour.

The watch will keep a history of 12 hours of measurements. While cycling through the history, notice the flashing of the altitude history graph, which indicates how far back of the history you are looking at.

Changing the altitude and temperature measurement unit

While in the altitude mode screen and the top display is showing temperature, press and hold the BAROmeter button to cycle the combinations of altitude and temperature measurement unit.

degC, meter (m) --> degC, feet (ft) --> degF, feet (ft) --> degF, meter (m)

SKMEI 1418 /1427 other contents